Configuring Android Devices for Proper Detection

Configuring Android Devices for Proper Detection

This guide goes over how to properly configure Android devices so they are detected by Futuredial's software.
    • Related Articles

    • LG Devices don't connect, are not recognized, or fail to process.

      Sometimes when running LG devices, certain models have problems detecting, and sometimes will fail with error code 11001 thru 11010.  LG devices can be tricky, and they don't seem to have the same connectivity configuration as many of the other ...
    • iPhone 7 devices won't activate

      Over time, we have noticed an increase in the number of activation failures, or devices that take a very long time to activate. Specifically, iPhone 7 devices with model number A1660. Apple has issued a statement regarding these devices, which have ...
    • Function Test App prompts for a Passcode on iOS devices

      From time to time, some of our users report that the Function Test app is requesting a passcode when launching, instead of running the desired test profile. This happens when the app is launched without a test profile loaded. You can avoid this error ...
    • Recommended Hardware Configuration

      Single 7 Port Hub Single 20 Port Hub Two 20 Port Hubs CPU Core i5 Core i5 Intel Core i9-10900X RAM 8GB RAM (minimum) 16 GB RAM (minimum) non-ECC 16GB DDR4 or above PCI USB 3.0 Card (Click link for recommended card) Recommended Required Required 500GB ...
    • Lean One-Touch Installation Guide

      1. Installing Lean One Touch The Lean One Touch installer can be downloaded at the following link: Lean One Touch Installer Once downloaded, please run the installer on each machine. You will be asked for your installation serial number. Your ...